TCC Universal Baller Complete Kit

What it is

The Universal Baller is the flagship system from TerpChasers Club — and the only desktop Ballvape Vaporizer that covers four completely different workflows out of a single housing. That makes it a platform rather than a single product: one device that adapts to your style instead of locking you into one.

Two versions to choose from

TCC has reworked the heater head of the Universal Baller. We offer both builds; pick your version at the top of the page. Coil, PID controller, docking station, Hybrid Bowl, handles and tools come with both.

According to TCC, SS444 conducts heat better, contains less nickel and expands less when hot. The lid and bowl of the current version have more mass, and the handles fit better.

Please don't mix housing parts of the two versions: according to the manufacturer, the V2 lid and the titanium inner chamber of the current version do not fit together. The guide further down shows how each version is assembled.

The four modes

The real strength of this system is its modular coil/bowl architecture. Using the included components, the Universal Baller can be run in four entirely different configurations:

1. Wireless Quartz — pure convection In Wireless Quartz mode, heat the head on the docking station and remove it for the draw. The quartz insert, ruby balls and one matching disc sit inside the heater housing. Herbal material stays in the separate bowl; hot air flows from the heater head through the bowl.

2. Wireless Metal — cordless power configuration A full charge of 1000 ruby balls in the titanium setup, with one of the three included SS mesh screens as a diffuser. Airflow is controlled via screen choice and carb technique — from dense, full hits to softer sessions. The wireless dock keeps the setup hot between hits.

3. Wired Quartz — hybrid heating at lower temperatures In Wired Quartz mode, the coil stays on the heater head. The quartz insert, balls and disc remain in the housing, and herbs stay in the separate bowl. Use only parts compatible with the selected configuration.

4. Wired Metal — maximum cloud production 200 W coil under continuous power, 1000 ruby balls fully heated through, no energy drop on the hit. The mode for long sessions, dense clouds, group sessions.

What's in the box

Ultra High Airflow version

• 1× Universal Baller Housing SS444 & Titanium with wired adapter
• 1× Ultra High Airflow Quartz Insert
• 1× Ultra High Airflow Disc

Standard V2 version

• 1× Universal Baller Housing V2 (titanium interior, stainless steel exterior) with wired adapter
• 1× Quartz Insert V2 (for quartz sessions)
• 1× Laboratory Fritted Disc (sintered quartz fritted disc for even diffusion)

In both versions

• 1× 25 mm 200 W enail coil
• 1× 22 mm Hybrid Bowl with 18 mm glass joint
• 1× 1000-pack 2 mm ruby balls (synthetic corundum / Al₂O₃)
• 3× SS machined screens (CNC-machined stainless steel screens)
• 1× Wireless Handle + 1× Wired Handle (wooden grips for safe handling)
• 1× Wireless Docking Station
• 1× Classic PID Controller with power cable (220 V EU)
• 1× Aluminum Loading Funnel for loss-free loading
• 1× CrossingTech Scoop for portioning
• 1× Tamp for clean packing
• 1× Allen Key for maintenance
• 2× Snap Rings for optional retention of the metal screens

Device kit without a bubbler. You also need a compatible bubbler with a 18 mm socket and a power outlet.

Specifications

• Heater: 25 mm 200 W enail coil
• Housing material: Ultra High Airflow: SS444 stainless steel with Grade 2 titanium inner chamber · Standard V2: titanium liner with SS outer shell
• Bowl: 22 mm hybrid bowl, 18 mm female glass joint
• Power: 220 V (EU) — PID controlled
• Temperature range Wireless Mode: approx. 490–610 °F (≈ 254–321 °C)
• Temperature range Wired Mode: approx. 400–570 °F (≈ 204–299 °C) with 15–45 s heat soak
• Joint: 18 mm female (standard for Ballvape bubblers), 14 mm adapter available separately
• Matching bubbler: CrossingTech Chugga-Jug 2.0 — comes with an 18.8 mm joint and fits directly, no adapter needed

Modular and expandable

For upgrades, check each accessory’s version and requirements. In particular, the current adapter set requires the current metal housing:

• TCC Universal Baller Hybrid Bowl Complete Set — all bowl tops and joint sizes (10/14/18 mm)
• TCC Universal Baller Adapter Set — current SS444 version with 25 mm TMJ adapter; no FMJ adapter included. Requires the current metal housing; do not assume it fits an existing V2 housing. TMJ use also requires a TMJ bowl top and TMJ titanium adapter ring, both sold separately.
• TCC Ruby Insert with Disc — premium upgrade to a full ruby airpath
• TCC Fritted Disc with Quartz Ring — replacement or second fritted disc for the Standard V2 version
• TCC Ultra High Airflow Quartz Insert and Ultra High Airflow Disc — spare parts for the Ultra High Airflow version
• TCC Universal Baller Housing SS444 & Titanium — upgrades a Standard V2 to the current housing later on; your V2 quartz parts keep working in it
• TCC Microdose Bowl V2 — smaller bowl variant for solo sessions

For the bubbler, the CrossingTech Chugga-Jug 2.0 fits directly: it comes with an 18.8 mm joint, so it sits on the Hybrid Bowl's 18 mm joint without an adapter.

Workflow in five steps

1. Load — fill the bowl using the aluminum funnel. Important: don't overpack the bowl. Cleaner hits, more even extraction, and far less cleaning.
2. Heat up — depending on the mode: Wireless Quartz/Metal charges the housing on the dock, Wired Quartz/Metal heats on the coil with a 15–45 second heat soak before the hit.
3. Inhale — straight through the 18 mm glass joint of your bubbler. Carb cleanly, don't rush.
4. Use the pass-through OR pull the housing off before ending the hit — prevents vapor backflow and keeps the bowl clean.
5. Cool down before disassembly — let it heat for 5+ minutes before taking it apart, then loosen with pliers half a turn, let it cool fully, then disassemble. Never force quartz loose.

Care & lifespan

• Quartz components stay clean if you don't overpack and you carb cleanly. If needed, soak in isopropanol.
• Ruby balls are self-cleaning under normal use — organic residue burns off on the next heat cycle. For heavy buildup: iso bath or saltwater rinse.
• Coil & housing keep dry, don't kink the wired adapter cable.
• Snap rings check visually after extended use — they're helper parts, not load-bearing.
• Important on quartz disassembly: if a quartz part is stuck, do NOT force it. Heat it more, then apply gentle downward pressure. The seal only releases through thermal expansion — force leads to breakage.

Warranty & support

36 months BallvapeShop warranty on the entire device. Repairs, spare parts, and advice all run directly through us — no shipping back to Asia, no waiting for weeks. Questions about operation or picking the right adapters: send us a message, we know this device.

Who is this system for?

The Universal Baller is aimed at users who don't just want a throwaway solution but a platform they can work with for years. Anyone who already owns another Ballvape Vaporizer housing and feels limited by it — whether through missing adapters, rigid bowl sizes, or a lack of quartz options — gets a tool here that grows with them. And anyone who values pure convection has, in Wireless Quartz mode, one of the cleanest setups currently available on the market.