CrossingTech Micro Matrix Bowl

The CrossingTech Micro Matrix Bowl is the microdose-optimised sister of the Titanium Matrix Bowl — the same titanium-and-glass hybrid build, just more compact. For anyone who works with little material but still wants dense, full-bodied vapour: the smaller chamber keeps your load tightly packed, so even small amounts vaporise cleanly and completely — no dead volume, no wasted flavour.

Hybrid heating

Grade-2 titanium stores the heat from contact with the hot heater housing and the ruby balls (conduction) and passes it straight into the material. At the same time, hot air streams convectively through the balls into the bowl. This blend of fast convection and stored conduction delivers deep, even extraction at moderate temperatures — strong clouds without scorching the flavour.

Capacity & dosing

Approx. 0.3 g maximum — less than the full-size Titanium Matrix Bowl, but more airflow than all-glass microdose bowls. You set the load size with the height-adjustable mesh screen:

• Microdose: seat the screen higher up — even small amounts sit cleanly in the airflow.
• Full load: push the screen down and pack more densely, up to approx. 0.3 g.

Rule of thumb: never load so high that the material touches the heater housing.

Note: "injector" and "diffuser" describe the type of heater housing, not two fill levels of the bowl — an injector sits inside the bowl, a diffuser surrounds it from the outside. The Micro Matrix Bowl works with both; the recommended maximum load is approx. 0.3 g either way.

Construction

• Material: premium grade-2 titanium (bowl body) + high-grade borosilicate glass (joints)
• Joints: 14.4 mm and 18.8 mm — both included, swappable without tools
• Screen: height-adjustable high-flow stainless-steel screen for even airflow with no clogging
• O-rings: heat-resistant Viton — keeps material and balls from slipping through

Recommended temperature range

260–330 °C (500–626 °F) — clean starts at 285 °C, step up in 5 °C increments for more density.

Compatibility

Direct plug-and-play replacement for the CrossingTech devices:

• Ruby Twist and Ruby Twist Pro
• Thermal Twist
• Wireless One Hit Wonder V2 (WOHW V2)

Not intended for TerpChasers Club devices — they have their own bowl architecture (see the TCC category).

What's in the box

• 1× Micro Matrix Bowl body in grade-2 titanium
• 1× 14.4 mm glass joint (pre-installed)
• 1× 18.8 mm glass joint (for swapping)
• 1× high-flow stainless-steel screen (spare)
• 2× Viton O-rings (spare, heat-resistant)

First use

Rinse briefly with warm water, air-dry. Check the pre-installed 14.4 mm joint — if your bubbler is 18.8 mm, just swap it.