CrossingTech Titanium Matrix Bowl

The Titanium Matrix Bowl is a hybrid glass and Grade-2 titanium bowl — built for the Ruby Twist and the Wireless system. Conduction (contact with the hot heater housing) and convection (air flowing through) in a single unit, without the classic drawback of pure metal bowls that expand when heated and stick in the glass joint.

It's the bigger sister to the Micro Matrix Bowl and built for full sessions.

Construction

• Bowl body: Grade-2 titanium
• Glass joints: borosilicate — 14.4 mm pre-attached, 18.8 mm spare in the box
• Screen: 19 mm stainless-steel mesh screen (spare)
• O-rings: 2× heat-resistant spare o-rings

Capacity & modes

• With an injector heater (e.g. Ruby Twist, Thermal Twist): approx. 0.3 g
• With a diffuser heater (e.g. WOHW V2): approx. 0.5 g

"Injector" and "diffuser" describe the type of heater housing, not two settings of the bowl: an injector sits inside the bowl and takes up some volume, a diffuser surrounds it from the outside. Manufacturer figures: approx. 0.35 g and 0.65 g — we deliberately list the more practical values.

Compatibility

• Wireless One Hit Wonder V2 — standard bowl in the kit, with both the stainless-steel heater housing and the titanium heater housing
• Ruby Twist V1 and Ruby Twist Pro

What's in the box

• 1× Titanium Matrix Bowl in Grade-2 titanium, with 14.4 mm glass joint pre-attached
• 1× 18.8 mm glass joint (for swapping)
• 1× Spare 19 mm stainless-steel mesh screen
• 2× Spare o-rings (heat-resistant)

Tip for stuck joints

Glass joints can sit tight. Grip the bowl and the joint firmly and pull straight apart — don't wiggle, don't twist. Once the joint is out, apply a little o-ring lubricant to the rings to make it easier next time. For really stuck joints, use heat: place the heater housing on the bowl for about 15 seconds, then grip the titanium part with an oven glove or towel and pull the glass joint straight out.

Optional & matching accessories

• Mesh screens for Matrix Bowl (3-pack) — matching wear screens
• 14/18 mm glass adapter — replacement glass joints as a swap set
• Micro Matrix Bowl — smaller variant for microdoses
• Original glass bowl — alternative glass bowl
• Chugga-Jug 2.0 Bubbler Bong — matching bubbler with 14 mm joint